How to Power Multiple Guitar Pedals

How to Power Multiple Guitar Pedals: The Easiest Method

Spread the love

In this modern age of playing guitar and making all kinds of beautiful music, guitar pedals are almost a necessity. Of course, those who want to keep using acoustic or classical guitars forever don't need stomp boxes. However, if you are jamming using an electric instrument, then you will develop a need for a set of pedals as time goes by.

Using different pedals at the same time requires a specific power setup, and you probably don't know how to power multiple guitar pedals all by yourself.

Hence, read on to find out about a pretty easy method to do this.

How to Power Multiple Guitar Pedals

Famous guitar players often have a dedicated power supply for each pedal they are using during a performance. They also don't have to worry about setting it all up because a group of professional sound technicians takes care of it for them.

How to Power Multiple Guitar Pedals 2

However, if you want to practice with various sound effects, or play smaller shows using them, you won't need a dedicated power supply for each of them. The truth is that it is sufficient to power all the pedals using a single energy source.

The Daisy Chain Method is the best way to do this, and in this article, we will explain everything there is about it.

The Daisy Chain Method

If you want to do this correctly, first, you must learn a few things about electricity. Guitar pedals can have different voltage requirements and pin polarities inside of them, so you can't merely connect just any different pedals together.

If you are careless and make some mistakes, the setup just won't work. That is the best case scenario. The worst case scenario is burning up your pedals with too much electricity and completely ruining them.

Setting Up the Daisy Chain

As you can see, the hardest part about connecting your pedals is finding the compatible models that can work together while still being supported by your amplifier and power supply. Actually connecting the pedals is not that hard to do.

In order to do this, you will be required to purchase a daisy chain from a local guitar shop or an online store. There is nothing more to know about this, and each product will indicate which types of pedals it can work with.

After your daisy chain arrives, just plug it into all of your pedals. Then, connect it to a power source and the amplifier, and you’re done!

Precautions to Take

Here is a list of some things to look out for before deciding to chain a set of pedals. They are all related to safety and electricity usage, so don't skip these steps as they will save you a lot of time and make you avoid trouble down the road.

How to Power Multiple Guitar Pedals 3

Voltage

Various guitar pedals require different voltage levels to work correctly. You won't have much trouble with this part of the process, as almost all new guitar pedals, especially newer models, all require nine-volt batteries.

Some models can accept power sources of different strengths, such as 12-volt or 18-volt batteries, but they are usually used when playing large shows.

This is important for those who might own some vintage pedals too, which can only work with a voltage level other than nine. In this case, you won't be able to chain that pedal to your other ones, as they must all be within the same voltage requirement zone.

Positive and Negative Pins

Each guitar pedal has two energy modes: positive and negative. They are often referred to as negative or positive center pins. Most models will require a negative center pin, but some weird or outdated models work only on positive.

This goes for amplifiers and power supplies too. It's crucial not to connect multiple pedals that have different positive/negative requirements using the Daisy Chain Method, as it can completely ruin your setup and cause damage to your stomp boxes.

Power Supply Compatibility

Each pedal in a chain will draw a certain amount of electricity. Hence, crucial to have a power supply that is strong enough to support the whole setup. Otherwise, the vast requirements will burn out your power supply and completely ruin it.

Additionally, if the voltage of the power supply is too low, then the pedals won't work at all. The more dangerous situation is the voltage being too high, as this may cause a complete burn out of your stomp boxes and even a small fire.

Final Words

Many guitar players don't know how to power multiple guitar pedals, but the truth is, this is not a hard thing to do. Once you understand the electricity requirements and take the necessary precautions, then you can rest assured that you can do this all by yourself.

We recommend always buying a fresh assortment of matching pedals that are already guaranteed to connect to each other. You will also need a matching power source. If you don't want to worry about power and voltages, you can always find sets like these being sold together.

Click Here to Leave a Comment Below

Leave a Reply: